What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 13:26
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
the problem then depends on "how fast does the fuse operate?".
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–16 [ OO OLAOYE OYEBODE ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
It seems Mohan does not understand the difference between a comment and an Answer.
What is your daily motivation and does it work?
The MOV will conduct when the voltage exceeds 50% of line voltage.
The bolt then partially travels down the line to your home.
He then describes the function of a fuse.
United Airlines Flight Attendants Lose Legal Battle Over ‘Reprehensible’ Sickness Policy - PYOK
He then describes Rainy Season and Lightning.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This one hit behind the barn.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
what exactly is a ‘surge’ protector?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Why is there so much evil in the world?
but I think this circuit , shows a few more pieces.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Because the load is inductive, the current lags the voltage.(by a bit).
This device then solves the entire problem.
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–10[John johnson John Johnson ]
Why should you never do drugs? Will this story absolutely shock you?
[old diagram got deleted by accident]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Cher’s son Elijah Blue Allman hospitalized after drug overdose: report - Page Six
Barnstars:
This is the picture of an electronic coil of wire wound around a core of magnetic material.
These are simplified answers to the original question, and does not change anything I wrote above.
In schematic diagrams this is the symbol for a fuse:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Brain Adapts to Neuron Loss Through Rapid Rewiring - Neuroscience News
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What is lightning?
but this device (an Inductor) … impedes the rapid changes in the current.
At what stage in your life did you realize, "No, I can't do this any more" and walk out? Why?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
First Sentence:
eight
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
There are three different concepts here that are getting confused.
It also is a device that limits the change in current flow.
so, what happens?
The other is “what does a “fuse” do?”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But… the neutral is now “floating” because of the 1 ohm resistance.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Upvotes:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
There are two important concepts here.
But it can get overloaded, and no longer works.
One is “what exactly is in a ‘surge protector’ ? ”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
These devices are installed between the “hot” and “neutral” and protective ground.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
[image of Common-mode choke]
The third is lightning and “how it gets conducted into a home.”
At least they know the answer if they wanted it.
This is where the MOV conducts again, and dissipated the energy.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
I post the exact comment here.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(Dc diagram shown, AC is similar).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
At one ohm, the resistor has a maximum of 1 watt power.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What does a fuse do?
nine
2024–10–14 [Omar Gharbi Omar Gharbi ]
Here is a simplified AC power diagram.
One
He then asserts :
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
For this case there are devices called Metal oxide varistors (MOV).
So, the voltage could go up to 500 volts, and the fuse will not open up.
An AC voltage/ current source, and an ac inductive load.
A fuse is a non-resetable over current circuit protector.
a photo is worth a thousand words.
This is 'the assistant's answer'
Edit 2024–10.
A circuit breaker is similar, but is resettable.